Difference between revisions of "Vendors:REV Robotics:UltraPlanetary Motor"

From Project Robotica
Jump to navigation Jump to search
(Created ultraplanetary page with seo)
 
m (Italicized FIRST)
 
Line 1: Line 1:
<!-- PLEASE READ
Please use this template to create a new page. Replace all of the "Lorem ipsum..." text and any text in "< >" (including the "< >") with your own text.
The paragraph above the first heading should be an introduction to the topic of the page. Copy and paste additional Headings and Sub-headings as needed.
The Additional Resources and References pages should be included in all pages even if they are empty. For instructions on how to create references so that the section is generated automatically, see [[Project Robotica:Contributor Guidelines#References]].
-->
{{#seo:
{{#seo:
|title=REV UltraPlanetary Motor - Project Robotica
|title=REV UltraPlanetary Motor - Project Robotica
Line 12: Line 5:
|robots=index, follow
|robots=index, follow
}}
}}
The REV UltraPlanetary Motor is an FTC legal motor sold by [[Vendors:REV Robotics|REV Robotics]]. It is popular among [[FTC:About|FIRST Tech Challenge]] teams because it is easily configurable between different gearings. The motor is able to be used for any subsystem a team wants because of its unique ability to change gearings.
The REV UltraPlanetary Motor is an FTC legal motor sold by [[Vendors:REV Robotics|REV Robotics]]. It is popular among [[FTC:About|''FIRST'' Tech Challenge]] teams because it is easily configurable between different gearings. The motor is able to be used for any subsystem a team wants because of its unique ability to change gearings.
__FORCETOC__
__FORCETOC__


Latest revision as of 19:26, 19 August 2022

The REV UltraPlanetary Motor is an FTC legal motor sold by REV Robotics. It is popular among FIRST Tech Challenge teams because it is easily configurable between different gearings. The motor is able to be used for any subsystem a team wants because of its unique ability to change gearings.


How it Works

When teams buy the UltraPlanetary Motor kit from REV it will come with a 5:1, 4:1, and 3:1 gearbox. If teams need more gearbox cartridges they can be purchased from the REV website. These gearbox cartridges can be easily screwed onto the base HD Hex motor included in the kit. Each cartridge will lower the gear ratio and increase the torque to strengthen the motor. This allows for teams to customize their motors to use just the right amount of torque for the job.


Pros Cons
Can be quickly modified to change the gear ratio Only a small part of the axle is supported
Has many different uses May be hard at first to modify the gearbox


UltraPlanetary Motor.PNG


How to Assemble the Motor

When assembling, make sure that the gearboxes are put together in descending gear ratios with the highest gear ratio being closest to the motor (ie: 5:1, then 4:1, then 3:1).

To assemble the motor and gearbox cartridges:

  1. First install the Mounting Plate using the supplied button head screws.
  2. Then start installing the chosen cartridges onto the motor.
  3. Afterwards, install the Output Cartridge. The Output Cartridge allows the motor to connect to an axle.
  4. Once the Output Cartridge has been installed, screw the motor and cartridges together using M3 screws The length of the M3 screws will vary depending on how many cartridges are on the motor. For just the Output Cartridge use an M3 x 10mm screw, but for every cartridge past that adds 10mm to the screw length. So one cartridge would be 20mm, and two cartridges in 30mm.
  5. After it has been fully constructed, put a 5mm hex axle into the Output Cartridge and then secure it using the provided set screw.

Assembly Video Guide

Here is a quick video we made to show how to assemble the motor.














Additional Resources

References

Retrieved from "https://projectrobotica.wiki/index.php?title=Vendors:REV_Robotics:UltraPlanetary_Motor&oldid=1082"